 |
| Quantity: | |
|---|---|
HM-AC9400
Howell
HM-AC9400
Acrylic structural adhesive
Description
AC9400 is a low-odor, flexible two-component acrylic structural adhesive. The two components are mixed in a volume ratio of 1:1. Provides excellent bonding strength, and its impact resistance and durability are very good. It can quickly bond with most metals and composite materials with minimal surface treatment; it also has excellent properties on most powder-coated materials. The bonding effect.
Typical Application
Structural bonding of various metals and plastics.
Product performance characteristics
Excellent construction performance
Low odor
Can effectively bond galvanized and powder-coated materials
1:1 mixing ratio
Excellent shear force
Characteristics
Properties before curing | ||
Part A | Part B | |
Colour | light yellow | light blue |
Viscosity（mPa·s） | 6000 | 25000 |
Mixing ratio (volume/mass) | 1:1 | |
Operable time (min)/(20g mixed) | 5-7 | |
Initial solidification time (min) / (20g mixed) | 11-15 | |
Color after curing | Green | |
Properties after curing | ||
Hardness(Shore D) | 64 | |
Tensile Strength(MPa) | 27 | |
Peel strength（N/cm） | 35 | |
Shear strength (MPa) | aluminum | 23 CF |
carbon steel | 25CF | |
stainless steel | 21 CF | |
Galvanized steel | 18 CF | |
ABS | 5.5 SF | |
Note: SF: indicates base material damage
CF: Indicates cohesive failure
*Standard conditions: temperature 23±2℃, relative humidity 50±5%
Usage Guidelines
1. In order to achieve better bonding effect, surface contaminants should be removed.
2. This product is a two-component product. Before use, unscrew the head plug, use a glue gun to apply a small amount of glue, ensure that the A&B components are squeezed out, and make the tail plugs of the glue A&B components flush, and then install the mixing head to apply glue. , and discard the first 3 to 5cm of glue before applying.
3. If you want to reuse it, please replace it with a new glue mixing head and re-dry 3 to 5cm of glue before use.
4. The glued workpiece should be fitted as quickly as possible. Larger amounts of glue and high temperatures will reduce the operating time.
5. Raising the curing temperature can reduce the curing time.
Storage method and shelf life
Store sealed in a cool, dry place away from light. The shelf life is 12 months at 5-28℃.
Precautions
This product is a safe and non-toxic substance after curing, but before curing, contact with the skin should be avoided as much as possible. If it accidentally splashes into the eyes, rinse quickly with plenty of water.
Detailed safety data can be found in the Product Safety Data Sheet.
Packaging
50ml
HM-AC9400
Acrylic structural adhesive
Description
AC9400 is a low-odor, flexible two-component acrylic structural adhesive. The two components are mixed in a volume ratio of 1:1. Provides excellent bonding strength, and its impact resistance and durability are very good. It can quickly bond with most metals and composite materials with minimal surface treatment; it also has excellent properties on most powder-coated materials. The bonding effect.
Typical Application
Structural bonding of various metals and plastics.
Product performance characteristics
Excellent construction performance
Low odor
Can effectively bond galvanized and powder-coated materials
1:1 mixing ratio
Excellent shear force
Characteristics
Properties before curing | ||
Part A | Part B | |
Colour | light yellow | light blue |
Viscosity（mPa·s） | 6000 | 25000 |
Mixing ratio (volume/mass) | 1:1 | |
Operable time (min)/(20g mixed) | 5-7 | |
Initial solidification time (min) / (20g mixed) | 11-15 | |
Color after curing | Green | |
Properties after curing | ||
Hardness(Shore D) | 64 | |
Tensile Strength(MPa) | 27 | |
Peel strength（N/cm） | 35 | |
Shear strength (MPa) | aluminum | 23 CF |
carbon steel | 25CF | |
stainless steel | 21 CF | |
Galvanized steel | 18 CF | |
ABS | 5.5 SF | |
Note: SF: indicates base material damage
CF: Indicates cohesive failure
*Standard conditions: temperature 23±2℃, relative humidity 50±5%
Usage Guidelines
1. In order to achieve better bonding effect, surface contaminants should be removed.
2. This product is a two-component product. Before use, unscrew the head plug, use a glue gun to apply a small amount of glue, ensure that the A&B components are squeezed out, and make the tail plugs of the glue A&B components flush, and then install the mixing head to apply glue. , and discard the first 3 to 5cm of glue before applying.
3. If you want to reuse it, please replace it with a new glue mixing head and re-dry 3 to 5cm of glue before use.
4. The glued workpiece should be fitted as quickly as possible. Larger amounts of glue and high temperatures will reduce the operating time.
5. Raising the curing temperature can reduce the curing time.
Storage method and shelf life
Store sealed in a cool, dry place away from light. The shelf life is 12 months at 5-28℃.
Precautions
This product is a safe and non-toxic substance after curing, but before curing, contact with the skin should be avoided as much as possible. If it accidentally splashes into the eyes, rinse quickly with plenty of water.
Detailed safety data can be found in the Product Safety Data Sheet.
Packaging
50ml
