Availability: | |
---|---|
Quantity: | |
AN242
Howell
AN-242 Anaerobic Threadlocker |
Description The use of anaerobic adhesive for locking and preventing loosening is because the adhesive can fill all the gaps in the threaded engagement and squeeze out air during "anaerobic curing" , thus forming insoluble polymers on the threaded mating surface. This was the earliest application direction of anaerobic adhesives. The threaded engagement can be classified into removable (241) and non-removable (271) with conventional tools. The method of locking and preventing loosening is simpler and more reliable than commonly used mechanical methods, therefore it has been widely applied. |
Characteristics | |||
Performance | Indicator | Result | |
Appearance | Blue | Blue | |
Viscosity CPS( 25ºC) | 1250 | 1258 | |
Stability(h) | >2 | >2 | |
Initial curing time (min) | <30 | 6 | |
Performance after 24 hours of curing under standard conditions of 25 ºC and 50% relative humidity | Breaking torque N.m | 24-36 | 25 |
Disassembly torque N.m | 24-36 | 28 |
Applications Non-thixotropic liquid, medium strength, removable, used for M6-20 thread locking and sealing. |
AN-242 Anaerobic Threadlocker |
Description The use of anaerobic adhesive for locking and preventing loosening is because the adhesive can fill all the gaps in the threaded engagement and squeeze out air during "anaerobic curing" , thus forming insoluble polymers on the threaded mating surface. This was the earliest application direction of anaerobic adhesives. The threaded engagement can be classified into removable (241) and non-removable (271) with conventional tools. The method of locking and preventing loosening is simpler and more reliable than commonly used mechanical methods, therefore it has been widely applied. |
Characteristics | |||
Performance | Indicator | Result | |
Appearance | Blue | Blue | |
Viscosity CPS( 25ºC) | 1250 | 1258 | |
Stability(h) | >2 | >2 | |
Initial curing time (min) | <30 | 6 | |
Performance after 24 hours of curing under standard conditions of 25 ºC and 50% relative humidity | Breaking torque N.m | 24-36 | 25 |
Disassembly torque N.m | 24-36 | 28 |
Applications Non-thixotropic liquid, medium strength, removable, used for M6-20 thread locking and sealing. |
Anti-mildew | Aquarium | Automobile | Construction Exterior Wall | Decoration | Electronics | Elevator | Farbricated Building | Home Appliances | Infrastructure | Nail Free | Pipe Thread Locking | Planar Sealing | Rail Traffic | Screw-locking | Silicone Conformal Coatings | Universal | Waterproof | Windows&Sun Romms