 |
AN262 is a single-component anaerobic threadlocker used for permanent locking and sealing of threaded fasteners. During curing, it requires oxygen exclusion and contact with metal ions. It is a high-strength product with fast curing, thixotropic viscosity, and excellent resistance to chemical media. It is suitable for various metal surfaces, especially for threaded fasteners subjected to strong vibration and impact. It is recommended for locking and sealing threaded fasteners below M10 to M20.
| Quantity: | |
|---|---|
HM-AN262
HOWELL
Howell HM-AN262 Anaerobic Threadlocker
Description |
AN262 is a single-component anaerobic threadlocker used for permanent locking and sealing of threaded fasteners. During curing, it requires oxygen exclusion and contact with metal ions. It is a high-strength product with fast curing, thixotropic viscosity, and excellent resistance to chemical media. It is suitable for various metal surfaces, especially for threaded fasteners subjected to strong vibration and impact. It is recommended for locking and sealing threaded fasteners below M10 to M20.
|
Characteristics |
l Single-component, solvent-free l Excellent construction process performance l High strength, can be permanently locked l Excellent resistance to chemical media |
Applications |
Engine bolts, pump housing bolts, construction machinery bolts, and other high-strength fastener assemblies
|
Technical Data |
Typical properties before curing | |
Chemistry-based | Acrylate |
Colors | Red |
Curing mechanism | Anaerobic curing |
Viscosity (mPa·s) | 2100 |
Density @23℃ | 1.10 |
Maximum Fill Gap (mm) | 0.13 |
Typical properties after curing | |
Torque at breakage (N·m, M10 carbon steel bolt) | 20 |
Average disassembly torque (N·m, M10 carbon steel bolt) | 30 |
Thermal expansion coefficient (ppm) | 76 |
Solvent resistance | Good |
Operating temperature (℃) | -60~150 |
Instructions: |
1. Surface treatment: It is recommended to clean the thread surface with a cleaner to achieve the best locking effect on oil-free surfaces. 2. When there is a large gap, low temperature, and inert surface (such as pure aluminum, stainless steel, galvanized, chromium-plated, etc.), it is necessary to use a promoter together. 3. Adhesive application: Apply adhesive to bolts, nuts, and threaded holes, and it is recommended to apply adhesive to at least three threads. 4. Assembly: Assemble bolts and nuts, and tighten to the specified torque.
|
Storage/ Shelf Life/Packaging |
Product shall be stored in a cool, dry area in unopened containers. The shelf life is 18 months when stored with temperature 5~28℃. Packaging: Type Unit Size 50 mL 250mL
|
Precautions |
This product is safe and non-toxic after curing. Before curing, try to avoid contact with skin. If it splashes into eyes, wash it with plenty of water quickly. For complete safety and handling information, please refer to the appropriate Material Safety Data Sheets prior to using this product.
|
Contact us |
Nanjing Howell New Material Technology Co., Ltd. Addr: Rm 501, Unit 7, Xingzhihui, Xinghuo road 19th, Jiangbei new district, Nanjing (211899), China.
American Warehouse：Add: 1006 CROCKER RD, DOOR E5, WESTLAKE, OH 44145 |
Howell HM-AN262 Anaerobic Threadlocker
Description |
AN262 is a single-component anaerobic threadlocker used for permanent locking and sealing of threaded fasteners. During curing, it requires oxygen exclusion and contact with metal ions. It is a high-strength product with fast curing, thixotropic viscosity, and excellent resistance to chemical media. It is suitable for various metal surfaces, especially for threaded fasteners subjected to strong vibration and impact. It is recommended for locking and sealing threaded fasteners below M10 to M20.
|
Characteristics |
l Single-component, solvent-free l Excellent construction process performance l High strength, can be permanently locked l Excellent resistance to chemical media |
Applications |
Engine bolts, pump housing bolts, construction machinery bolts, and other high-strength fastener assemblies
|
Technical Data |
Typical properties before curing | |
Chemistry-based | Acrylate |
Colors | Red |
Curing mechanism | Anaerobic curing |
Viscosity (mPa·s) | 2100 |
Density @23℃ | 1.10 |
Maximum Fill Gap (mm) | 0.13 |
Typical properties after curing | |
Torque at breakage (N·m, M10 carbon steel bolt) | 20 |
Average disassembly torque (N·m, M10 carbon steel bolt) | 30 |
Thermal expansion coefficient (ppm) | 76 |
Solvent resistance | Good |
Operating temperature (℃) | -60~150 |
Instructions: |
1. Surface treatment: It is recommended to clean the thread surface with a cleaner to achieve the best locking effect on oil-free surfaces. 2. When there is a large gap, low temperature, and inert surface (such as pure aluminum, stainless steel, galvanized, chromium-plated, etc.), it is necessary to use a promoter together. 3. Adhesive application: Apply adhesive to bolts, nuts, and threaded holes, and it is recommended to apply adhesive to at least three threads. 4. Assembly: Assemble bolts and nuts, and tighten to the specified torque.
|
Storage/ Shelf Life/Packaging |
Product shall be stored in a cool, dry area in unopened containers. The shelf life is 18 months when stored with temperature 5~28℃. Packaging: Type Unit Size 50 mL 250mL
|
Precautions |
This product is safe and non-toxic after curing. Before curing, try to avoid contact with skin. If it splashes into eyes, wash it with plenty of water quickly. For complete safety and handling information, please refer to the appropriate Material Safety Data Sheets prior to using this product.
|
Contact us |
Nanjing Howell New Material Technology Co., Ltd. Addr: Rm 501, Unit 7, Xingzhihui, Xinghuo road 19th, Jiangbei new district, Nanjing (211899), China.
American Warehouse：Add: 1006 CROCKER RD, DOOR E5, WESTLAKE, OH 44145 |
