 |
| Quantity: | |
|---|---|
Howell
Fiberglass Surface Tissue
Technical Data
Product Code | Unit Weight （g/m2） | LOI （%） | MD Tensile Strength （N/50mm） | Moisture Content (%) | Penetrating time (s) |
BM30-H | 30 | ≤ 10 | ≥ 25 | ≤ 0.5 | ≤10 ( Two layers ) |
BM50-H | 50 | ≤ 10 | ≥ 40 | ≤ 0.5 | ≤15 ( Two layers ) |
BM30-W | 30 | ≤ 10 | ≥ 30 | ≤ 0.5 | ≤10 ( Two layers ) |
BM50-W | 50 | ≤ 10 | ≥ 50 | ≤ 0.5 | ≤15 ( Two layers ) |
BM100-W | 100 | ≤ 10 | ≥ 180 | ≤ 0.5 | ≤15 ( Two layers ) |
BM60-P | 60 | ≤ 20 | ≥ 100 | ≤ 0.5 | -- |
BM90-P | 90 | ≤ 15 | ≥ 120 | ≤ 0.5 | -- |
Testing Basis | ISO 3374 | ISO 1887 | ISO 3342 | ISO 3344 | EN 14118 |
Paper core diameter: 76/152mm
Remark1. Any special products can also supply according to customers' request
2. The technical data above is for reference only
Description
Fiberglass surface tissue is mainly used for inner and outer surface treatment of FRP products, to make the surface smooth and even. It is suitable for saturated polyester resin, epoxy resin and phenolic resin. According to the applying process, it can be divided into winding BM (W) series, hand lay-up BM (H) series and pultrusion BM (P) series.
Characteristic
. Fiber Uniformly Dispersed
. Smooth and Soft Surface
. Fast Wet-out
. Excellent Molding Property
Packaging
1. Roll packaging: PE plastic film
2. Pallet packaging: Pallets should NOT be stacked in more than 2 layers.
Storage
This product should be stored in a dry, ventilated and rainproof place,with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in intact package when not used to avoid damp.
Fiberglass Surface Tissue
Technical Data
Product Code | Unit Weight （g/m2） | LOI （%） | MD Tensile Strength （N/50mm） | Moisture Content (%) | Penetrating time (s) |
BM30-H | 30 | ≤ 10 | ≥ 25 | ≤ 0.5 | ≤10 ( Two layers ) |
BM50-H | 50 | ≤ 10 | ≥ 40 | ≤ 0.5 | ≤15 ( Two layers ) |
BM30-W | 30 | ≤ 10 | ≥ 30 | ≤ 0.5 | ≤10 ( Two layers ) |
BM50-W | 50 | ≤ 10 | ≥ 50 | ≤ 0.5 | ≤15 ( Two layers ) |
BM100-W | 100 | ≤ 10 | ≥ 180 | ≤ 0.5 | ≤15 ( Two layers ) |
BM60-P | 60 | ≤ 20 | ≥ 100 | ≤ 0.5 | -- |
BM90-P | 90 | ≤ 15 | ≥ 120 | ≤ 0.5 | -- |
Testing Basis | ISO 3374 | ISO 1887 | ISO 3342 | ISO 3344 | EN 14118 |
Paper core diameter: 76/152mm
Remark1. Any special products can also supply according to customers' request
2. The technical data above is for reference only
Description
Fiberglass surface tissue is mainly used for inner and outer surface treatment of FRP products, to make the surface smooth and even. It is suitable for saturated polyester resin, epoxy resin and phenolic resin. According to the applying process, it can be divided into winding BM (W) series, hand lay-up BM (H) series and pultrusion BM (P) series.
Characteristic
. Fiber Uniformly Dispersed
. Smooth and Soft Surface
. Fast Wet-out
. Excellent Molding Property
Packaging
1. Roll packaging: PE plastic film
2. Pallet packaging: Pallets should NOT be stacked in more than 2 layers.
Storage
This product should be stored in a dry, ventilated and rainproof place,with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in intact package when not used to avoid damp.
