 |
| Quantity: | |
|---|---|
HM-MS90
Howell
3506100010
MS90 is presented as a premium, environment-friendly MS hybrid sealant whose headline property is high elongation.
Premium high elongation
Usage
Cut open the branch, fit the nozzle, cut it to a sloped tip and extrude the material onto the joint with a glue gun. Air pressure for pneumatic extruding should not exceed 0.4 MPa, and the working temperature should stay within 4°C - 40°C.
Let the parts cure in air. The skin forms first, and the sealant body then hardens inward until about 2~4mm is reached once 24 hours at 55% relative humidity have passed, going deeper over time.
Put the cap back and close the container whenever the product sits idle; light crust on the seal is wiped away before reuse, and the page reports no effect on normal use.
Construction
Cut the branch opening, put on the glue nozzle, cut the glue nozzle into a suitable slope, and apply it tothe construction site with a glue extrusion gun. During pneumatic gluing, the air pressure isrecommended not to exceed 0.4 MPa, and the construction temperature is recommended to be 4°C -40°C
Need the Right Sealant for Your Application?
Tell us your substrate, application, required color, packaging, quantity and performance requirements. Our team can recommend you the most suitable one for your project.
E-mail：inquiry@howseal.com
