 Email: inquiry@howseal.com     Tel+86-25 5820 5825
You are here: Home / Products / Silicone Sealant & Adhesive / Oxime Type Sealant / SS5569 RTV Silicone Sealant for Replacing Gaskets

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

SS5569 RTV Silicone Sealant for Replacing Gaskets

HM-SS5569 Room temperature vulcanized silicone (RTV) sealant, instead of gaskets, easy to use, can meet the requirements of on-site forming curing, production and maintenance. Using a new environmental protection formula, non-toxic, low odor curing into the gasket performance has the characteristics of temperature resistance, oil resistance, corrosion resistance, is a new generation of green environmental protection excellent performance alternative gasket sealant. Widely used in automobile, motorcycle, Marine and mechanical equipment engine, transmission, gear box, axle plane seal, is your best choice to solve the problem of plane seal assembly and maintenance. Previously, the joint surface seal was sealed with solid gaskets, such as paper gaskets, asbestos gaskets, steel gaskets, etc. The use of solid gaskets, due to the effect of stress, or gasket infiltration, a long time will occur leakage problems. Now, in order to completely solve the problem of leakage of the joint surface, we choose anaerobic flat sealant, or silicone sealant, instead of solid gaskets, to seal. This product has high bonding strength, good immediate sealing, good oil resistance, high and low temperature resistance, good weather resistance, pressure resistance and other excellent properties.
Availability:
Quantity:
  • SS5569

  • Howell



Automobile RTV Silicone Sealant HM-SS5569
ItemsIndicator
AppearanceSilver black paste, neutral
Surface drying time (h) 5~10min
Complete curing time (humidity 50±5%, temperature 23±2℃)≤20h
Seal clearance≤6mm
Elongation≥350%
Hardness35±5HA
Operating Temperature-50~+320ºC
Seal Pressure≥12MPa
Notes: *a, Conditioning, specimen is conditioned under (23±2) ºC, (50±5)% relative humidity if not specified; *b, Testing Condition, specimen is tested at (23±2) ºC, (50±5)% relative humidity if not specified;;*c, Substrate
*d, Others need to be specified.
The above data is intended to provide guidance for use and should not be used to write product specifications.

PRODUCT DESCRIPTION 
HM-SS5569 Room temperature vulcanized silicone (RTV) sealant, instead of gaskets, easy to use, can meet the requirements of on-site forming curing, production and maintenance. Using a new environmental protection formula, non-toxic, low odor curing into the gasket performance has the characteristics of temperature resistance, oil resistance, corrosion resistance, is a new generation of green environmental protection excellent performance alternative gasket sealant. Widely used in automobile, motorcycle, Marine and mechanical equipment engine, transmission, gear box, axle plane seal, is your best choice to solve the problem of plane seal assembly and maintenance. Previously, the joint surface seal was sealed with solid gaskets, such as paper gaskets, asbestos gaskets, steel gaskets, etc. The use of solid gaskets, due to the effect of stress, or gasket infiltration, a long time will occur leakage problems. Now, in order to completely solve the problem of leakage of the joint surface, we choose anaerobic flat sealant, or silicone sealant, instead of solid gaskets, to seal. This product has high bonding strength, good immediate sealing, good oil resistance, high and low temperature resistance, good weather resistance, pressure resistance and other excellent properties.

USAGE

1, Pretreatment: If you want to obtain the best bonding performance, the substrate surface needs to be clean and grease free treatment; 

2, Sizing: On the clean substrate surface, the product is coated into a sealant line, assembly parts within five minutes. Press the parts so that the adhesive is evenly distributed and the fitting surface is fully filled; 

3. Curing: the bonding point should be fully cured before bearing a large load. The curing speed depends on ambient humidity and temperature;

4. If there is overflow, it can be erased with non-polar solvent.


APPLICATION
Mainly used for flange sealing, with excellent oil resistance and ability to withstand large movement of adhesive joints, such as stamped metal covers (such as timing gear covers, oil pans, engines).

SIZING EQUIPMENT

1. Hand-held sizing gun 

(1) For 50 ml and 300 ml packages of branched products: hand-held equipment sizing gun To meet the manual operation of all 50 ml and 300 ml packages of branched products 

(2) The rapid response load system makes the barrel product more reliable and clear in the sizing process 

Clean and easy 

2. Loctite pneumatic sizing gun 

(1) Hand-held sizing gun for all 300 ml packages of branched products and 50 ml Packaged tubular products 

(2) Integration of pressure regulation systems 

(3) Rapid pressure regulation to reduce the adverse effects of residual pressure 

3. Use an edger 

For 70 ml aluminum tube packaging products, unscrew the cap, puncture the opening, and roll up the end of the toothpaste aluminum tube with a crimper to squeeze out the sealant.


STORAGE AND SHELF LIFE
Store the original sealed adhesive in a dry place with a temperature not exceeding 27 degrees.
The storage period is 12 months from the date of production.

COLOR AND PACKAGE
Black / Grey / Silver Black / Silver Grey
Different colours are available. 
300ml/tube, 70ml/tube, 50ml/tube


SAFETY 
Keep out of reach of children. Before operation, please carefully read the specifications of products and material, and instructions on 
the package of container. 
For more information about safety, please.






Previous: 
Next: 

Get In Touch

CONTACT US

Contact Us

 Email: inquiry@howseal.com
 Tel: +86-25 5820 5825
 Address: B-306, Building D4, 15 Wanshou Road, Jiangbei New District, Nanjing, China.
Copyright © 2023 Nanjing Howell New Material Technolofy Co., Ltd. All Rights Reserved. Support By Leadong | Sitemap. Privacy Policy