 Email: inquiry@howseal.com     Tel+86-25 5820 5825
You are here: Home / Products / Anaerobic Sealant & Adhesive / Flange Sealing Sealant / AN7515 Anaerobic Gasket Sealant Cures at Room Temperature

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

AN7515 Anaerobic Gasket Sealant Cures at Room Temperature

Before use, it is in the form of adhesive liquid with good flow ability, which can effectively penetrate into the small gaps in the flange or joint surfaces of mechanical products and isolate from air. It self-polymerizes and cures at room temperature, ensuring a strong bond and sealing
of the components, effectively preventing leaks on the sealing surfaces. The use of this adhesive is also simple, making it highly favored by users.
Availability:
Quantity:
  • AN7515

  • Howell


Product Description
Before use, it is in the form of adhesive liquid with good flow ability, which can effectively penetrate into the small gaps in the flange or joint surfaces of mechanical products and isolate from air. It self-polymerizes and cures at room temperature, ensuring a strong bond and sealing of the components, effectively preventing leaks on the sealing surfaces. The use of this adhesive is also simple, making it highly favored by users.
Product Parameters
AppearanceFluorescent purple
Relative density1. 1
Viscosity (mPa.S)150,000/400,000
Maximum seal clearance (mm)0.25
Maximum pressure after curing (kg/cm2)320
Operating temperature (℃)-55-150
PerformanceIndicator
Viscosity CPS( 25℃)Paste
Initial curing time1h
Full curing time16h
(*) These values will vary with environmental factors such as temperature, humidity and bonding materials.
Product Application
Thixotropic viscosity, good chemical resistance, rigid adhesive layer; Used for high temperature working plane sealing and rigid structure tight match flange sealing; Typical use: engine gear box separate surface, crankcase separate surface, cover plate and other plane seal.


Previous: 
Next: 

Get In Touch

CONTACT US

Contact Us

 Email: inquiry@howseal.com
 Tel: +86-25 5820 5825
 Address: B-306, Building D4, 15 Wanshou Road, Jiangbei New District, Nanjing, China.
Copyright © 2023 Nanjing Howell New Material Technolofy Co., Ltd. All Rights Reserved. Support By Leadong | Sitemap. Privacy Policy